Norpin Standard Cover Specifications - Norpin Manufacturing Co. Inc.

Standard Catalog Enclosures are plain and without surface finishes.

Any enclosure height within the range of Minimum & Maximum Height listed below is available without additonal modifications.

Additional modification services, surface finishes & materials are available upon request.

STANDARD COVERS & LIDS	SPECIFICATIONS
NORPIN PART NUMBER	ILT124-216S-XXX
OUTER WIDTH - W	1.710 in 43.434 mm
OUTER LENGTH - L	2.460 in 62.484 mm
MINIMUM HEIGHT - H	0.250 in 6.35 mm
MAXIMUM HEIGHT - H	1.687 in 42.8498 mm
BOTTOM RADIUS - BR *Inside Dimension	0.093 in 2.3622 mm
SIDE RADIUS - SR *Inside Dimension	0.250 in 6.35 mm
MATERIAL THICKNESS - T	0.040 in 1.016 mm
STANDARD TOLERANCES - W, L & H	±0.015 in ±0.381 mm
AVAILABLE MATERIALS *Additional Thicknesses Available	Aluminum Brass Copper Cold Rolled Steel Stainless Steel Other materials available upon request.
COVER/LID TYPES	OLT - Outside Lid Tight OLL - Outside Lid Loose OLG - Outside Gasketed Lid ILL - Inside Lid Loose ILT - Inside Lid Tight
VALUE ADDED SERVICES AVAILABLE	CNC Machining Punching Hardware & Flange Installation Full Line of Surface Finishes Available Additional Precision Fabricated Parts Tooling at little to no cost Welding & Brazing Annealing & Heat Treating Abrasive Blasting & Bead Blasting Fluorescent Penetrant Inspection
SURFACE FINISHING SERVICES	Chromic Anodize Type 1 Sulfuric Anodize Type 2 Hardcoat Anodize Type 3 Conversion Coatings Brush Cadmium Plate Chromate of Magnesium Nickel Plate(Sulfamate) Nickel Cadmium Plate Silver Plate Zinc Plating Tin Plate (Bright) Cadmium Plate Passivation Copper Paint & Primers Powder Coating Silk Screening Laser Etching