Norpin Standard Cover Specifications - Norpin Manufacturing Co. Inc.

Standard Catalog Enclosures are plain and without surface finishes.

Any enclosure height within the range of Minimum & Maximum Height listed below is available without additonal modifications.

Additional modification services, surface finishes & materials are available upon request.

STANDARD COVERS & LIDS	SPECIFICATIONS
NORPIN PART NUMBER	ILT216-400C-XXX
OUTER WIDTH - W	2.400 in 60.96 mm
OUTER LENGTH - L	3.900 in 99.06 mm
MINIMUM HEIGHT - H	0.312 in 7.9248 mm
MAXIMUM HEIGHT - H	0.437 in 11.0998 mm
BOTTOM RADIUS - BR *Inside Dimension	0.062 in 1.5748 mm
SIDE RADIUS - SR *Inside Dimension	0.203 in 5.1562 mm
MATERIAL THICKNESS - T	0.050 in 1.27 mm
STANDARD TOLERANCES - W, L & H	±0.015 in ±0.381 mm
AVAILABLE MATERIALS *Additional Thicknesses Available	Aluminum Brass Copper Cold Rolled Steel Stainless Steel Other materials available upon request.
COVER/LID TYPES	OLT - Outside Lid Tight OLL - Outside Lid Loose OLG - Outside Gasketed Lid ILL - Inside Lid Loose ILT - Inside Lid Tight
VALUE ADDED SERVICES AVAILABLE	CNC Machining Punching Hardware & Flange Installation Full Line of Surface Finishes Available Additional Precision Fabricated Parts Tooling at little to no cost Welding & Brazing Annealing & Heat Treating Abrasive Blasting & Bead Blasting Fluorescent Penetrant Inspection
SURFACE FINISHING SERVICES	Chromic Anodize Type 1 Sulfuric Anodize Type 2 Hardcoat Anodize Type 3 Conversion Coatings Brush Cadmium Plate Chromate of Magnesium Nickel Plate(Sulfamate) Nickel Cadmium Plate Silver Plate Zinc Plating Tin Plate (Bright) Cadmium Plate Passivation Copper Paint & Primers Powder Coating Silk Screening Laser Etching